Blow Machine/Extrusion Blow Moulding Machine/Blow Molding Machine:
1).Jerrycan blow molding machine experience for more than 12 years
2).Machine produce the max for 30L jerrycan
3).The capacity is about 60pcs/h.
4).The famous imported components for machine
5).Taiwan Yuken hydraulic valve for stable working
6).The deflashing system can be equiped according to customer's request.
2.Main characteristics of Blow Machine/Extrusion Blow Moulding Machine/Blow Molding Machine:
1).Accumulator head, single layer, the capacity is up to 30L jerrycan, drum.
2).It process the material as HDPE, PP, ABS and etc.
3).Power supply: 380VAC, 50Hz (depending on client's county ).
4).The machine is mainly composed of extrusion system, die head system,clamping system,hydraulic system and electrical systems:
This machine is mainly used to produce 30L drum ,chemical drum and oil drum. Some basic parameters are as follows:
1.Screw diameter: 80mm
2.L/D ratio: 24/1
3.Max capacity: 30L
Dry cycle: 180pc/h
Clamping force: 230KN
Platen open stroke: 400-900mm
plasten size: 900*780mm
Max platen size: 900*780mm
Oil Pump Power: 11kw
Extrusion motor: 30KW
Plasticizing capacity: 100kg/h
Heating zone: 4 zones
Extrusion heating power: 20.2kw
Power of Die heating: 15.2kw
Max die pin diameter: 250mm
Accumulator head capacity: 5L
Extrusion system:screw: specially designed based on material's trait, High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2.Barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2.
Die head system:Accumulator die head, single cylinder, central injection, vertical fist in first out design, accumulator channel slick; slip parts like injection piston and cylinder made with different material and technique, work balanced and reliable.
Clamping system:fixed clamping system, double diagonal tie bar single cylinder central clamping, wider space for the mould, install and dismantle the mould easily, linear roll guide rail.
Hydraulic system:adopted proportional pressure controlling, with hydraulic valve and pump of Taiwan Yuken, balanced and accurate action, prolonged useful life, sensitive response.
3.Advantages of this Blow Machine/Extrusion Blow Moulding Machine/Blow Molding Machine:
1).Adopt energy-saving system which can increase the 20% efficiency.
2).The capacity is about 95pcs/h which is15% higher than some others.
3).Power consumption is about 15% lower.
4).All process are well computerized which makes the operation more conenient.
5).Imported hydraulic components which gurantee the stable working for long time.
4.Products produced by this Blow Machine/Extrusion Blow Moulding Machine/Blow Molding Machine:
1). Instruction for Installation and Debugging
Before delivery,FORSTEC takes responsible for debugging of machine, in order to make sure the provided machine could be safely and smoothly put into operation.
FORSTEC also take responsibility to have debugging overseas, and Client abroad please sends invitation forward of time to engineer of FORSTEC, provides the engineer with round-trip tickets, accommodation, vehicle and $55 per day salary.
2). User Training
Before delivery, FORSTEC will take responsibility to indoctrinate technical training to the users so that they could understand the machine features and could operate the machine by themselves.
3). Warranty Period
The warranty period for FORSTEC machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.
6.Main parameters for this Blow Machine/Extrusion Blow Moulding Machine/Blow Molding Machine:
|4||Drive motor||AC 30Kw 3 Phase asynchronism motor|
|5|| Inverter drive||America Amerson|
|6||Heating zone with cooling fan||4 zones|
|9||Vertical adjustment of head||400mm|
|10||Forward/Backward adjustment of head||400mm|
|11||Groove feed barrel cylinder||No|
|12||Gear box||Hard gear decelerator|
|13||Ladder and safety rails||fixed|
|2||Design||First in, first out|
|3||Heating zone||4 zones|
|5||Max die$pin diameter||250mm|
|6||Die head axis with pre-blow||80mm|
|7||Accumulator push-out stroke measurement||Transducer Italy Gefran|
|1||Tie bar||Two tie bar|
|3||Length of mold||410-510mm|
|6||size of mold||600×1000mm|
|7||Clamping stroke measurement||Proximal sensor TAIWAN RIKO|
|9||Number of hydraulic cylinder||1|
|11||Support parts for platen movement||Guide|
|1||Drive motor||AC 11Kw 3 Phase asynchronism motor|
|6||Oil tank capacity||400L|
|8||Cooling water for oil||fixed|
|9||Control of oil level & temperature||Checking oil temperature and abnormal alert|
be observed dipstick