1. Specifications for High Quality FSC30L Extrusion Blow Moulding Machine:
1). FSC30L Extrusion Blow Moulding Machine experience of the engineer for more than 12 years
2). Machine produce the max for 30L jerrycan
3). The capacity is about 45pcs/h.
4). The famous imported components for machine
5). Taiwan Yuken hydraulic valve for stable working
6). The deflashing system can be equiped according to customer's request.
2. Main characteristics of High Quality FSC30L Extrusion Blow Moulding Machine:
1). Accumulator head, single layer, the capacity is up to 30L jerrycan, drum., bottles and etc
2). It process the material as HDPE, PP, ABS and etc.
3). Power supply: 380VAC, 50Hz (depending on client's county ).
4). The machine is mainly composed of extrusion system, die head system, clamping system, hydraulic system and electrical systems:
5). The machine uses energy-saving system which can reduce at least 20% the power consumption
Screw mode: Gradually changed screw with same distance and different deep;
Diameter of screw: φ 80mm, L/D: 24/1;
Material of screw: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 800, brittleness≤ 2;
Material of barrel: High quality nitriding steel 38CrMoAlA, with nitriding surface HV≥ 900, brittleness≤ 2;
Drive mode: Japanese Toshiba converter instrument + Hard gear surface decelerator;
Drive power: 41KW;
Plasticizing capacity: 100Kg/hr;
Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ± 1%;
Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;
Heating power: 20.2KW;
Zones of heating: 4 zones;
Mode of cold: Automatic blowing, three blowers. Power: 90W× 4;
ACCUMULATOR HEAD SYSTEM
Mode of general constructions: Accumulator head;
Mode of heating: Adopting ceramic heaters;
Temperature controlling precision: Various in ± 1;
Heating power: 15.2kw;
Temperature control: Adopting Japan Omron automatic temperature control module;
Temperature controlling precision: Various in ± 1%;
Max annular diameter: 250mm;
Some general information for High Quality FSC30L Extrusion Blow Moulding Machine:
Clamping Force for platen: 410KN
Oil pump power: 15kw
Screw diameter: 100mm
Platen stroke: 450-1250mm
Platen size: 1020*1060
Max Platen size: 1020*1060mm
Air pressure: 0.8MPa
Air Consumption: 0.8m3/m
Total power: 110kw
The L/D ratio: 24: 1/30: 1
Plasticzing capacity: 170kg/h
Max die capacity: 10L
3. Advantages of this High Quality FSC30L Extrusion Blow Moulding Machine:
1). Adopt energy-saving system which can increase the 18% efficiency.
2). The capacity is about 45pcs/h which is15% higher than some others.
3). Power consumption is about 20% lower.
4). All process are well computerized which makes the operation more conenient.
5). Imported hydraulic components which gurantee the stable working for long time.
5. After-sale service FSC30L Extrusion Blow Moulding Machine:
1). Instruction for Installation and Debugging
Before delivery, forstec takes responsible for debugging of machine, in order to make sure the provided machine could be safely and smoothly put into operation.
FORSTEC also take responsibility to have debugging overseas, and Client abroad please sends invitation forward of time to engineer of FORSTEC, provides the engineer with round-trip tickets, accommodation, vehicle and $55 per day salary.
2). User Training
Before delivery, FORSTEC will take responsibility to indoctrinate technical training to the users so that they could understand the machine features and could operate the machine by themselves.
3). Warranty Period
The warranty period for FORSTEC machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.
6. Main parameters for this High Quality FSC30L Extrusion Blow Moulding Machine:
|4||Drive motor||AC 45Kw 3 Phase asynchronism motor|
|5||Inverter drive||America Amerson|
|6||Heating zone with cooling fan||5zones|
|9||Vertical adjustment of head||400mm|
|10||Forward/Backward adjustment of head||450mm|
|11||Groove feed barrel cylinder||No|
|12||Gear box||Hard gear decelerator|
|13||Ladder and safety rails||fixed|
|2||Design||First in, first out|
|5||Max die$pin diameter||450mm|
|6||Die head axis with pre-blow||100mm|
|7||Accumulator push-out stroke measurement||Transducer Italy Gefran|
|1||Tie bar||Two tie bar|
|3||Length of mold||465-600mm|
|6||size of mold||1020×1060mm|
|7||Clamping stroke measurement||Proximal sensor TAIWAN RIKO|
|9||Number of hydraulic cylinder||1|
|11||Support parts for platen movement||Guide|
|1||Drive motor||AC 15Kw 3 Phase asynchronism motor|
|6||Oil tank capacity||450L|
|8||Cooling water for oil||fixed|
|9||Control of oil level & temperature||Checking oil temperature and abnormal alert|
be observed dipstick
We can send technician to install the machine or customer can send technician to our factory for training.
Buyer need to pay air thicket & food & hotels.
(a) All specifications and designs are subject to change without notice.
(b) The price of the machine all are in US dollars based on FOB China Port.
(c) The price is base on 380V, 50Hz, 3 Phase, for special power, add additional 5% of all machine.