Automatic Plastic Bottle Blow Molding Machine Extrusion Blow Moulding Machine for Detergent Bottle Disinfectant Bottle:
1).Speciliazed in extrusion blow molding machine of the engineer for more than 15 years experience.
2).With deflashing system on mould or equiped on the machine itself.
3).More than 20% higher effiency than others
4).Imported brand components
2.Main Characteristics for Automatic Plastic Bottle Blow Molding Machine Extrusion Blow Moulding Machine for Detergent Bottle Disinfectant Bottle:
1).Double station, one layer, 50mm screw with 13.8kw heating power for material of HDPE,PP,ABS and etc.
2).Power supply:380VAC, 50Hz (depending on client's county ).
3).Different Die Head for Choosing:
One die head (2L):5L bottle around 130 bottles per hour
Two die head (1L):2L bottle around 220 bottles per hour
4).Center Distance:Two Die head:130mm,Three Die head:90mm,tetra-die head:75mm
5).Auto matic Deflashing system:Neck/ handle/ bottom deflashing.Fully automatic.
6).MOOG 100 Points Parison Controller (Optional)
Some details for this Automatic Plastic Bottle Blow Molding Machine Extrusion Blow Moulding Machine for Detergent Bottle Disinfectant Bottle:
Maximum Volume:10 litter
Material:HDPE, PP, PVC, PETG etc.
View Stripe matchable
1>Double station and single satation
2>Single mould head to six mould head
3>Mutli-layer with View Strip line
4> It can match auto-deflashing device, Leak detector, Chiller and crusher recycle system.
5> The daliy output(24 hours) can reach approximately from 5, 000 to 86, 000;It can produce from 0.2-5L plastic hollow bottle products.
Forstec series are fully-automatic pet stretch-blow molding machines(preheat).It has 3 to 16 cavities and the maximum capacity of the products is 2000mL.It can blow bottles in shapes:Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6000BPH(6-cavity), 8000BPH(8-cavity), 12000BPH(12-cavity), 16000BPH(16-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
3.Basic working theory:
This kind of blow molding machine is using PLC control system, operating manual in English, pneumatic operated, clamping by hydraulic cylinders actuated by pneumatic primary cylinders.Moreover, it equips with deflashing system, resulting in saving time and manual cost for clients.
We use plastic film or wood cases for packaging in order for the export market.
The payment item is 30% as perpayment and the balance 70% will be paid before shipment.
1).Instruction for Installation and Debugging
Before delivery, FORSTEC takes responsible for debugging of machine, in order to make sure the provided machine could be safely and smoothly put into operation.
FORSTEC also take responsibility to have debugging overseas, and Client abroad please sends invitation forward of time to engineer of FORSTEC, provides the engineer with round-trip tickets, accommodation, vehicle and $55 per day salary.
Before delivery, FORSTEC will take responsibility to indoctrinate technical training to the users so that they could understand the machine features and could operate the machine by themselves.
The warranty period for FORSTEC machine is one year with a life long maintenance.If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
6.Technical parameters for Automatic Plastic Bottle Blow Molding Machine Extrusion Blow Moulding Machine for Detergent Bottle Disinfectant Bottle:
|4||Drive motor||AC 15Kw 3 Phase asynchronism motor|
|6||Heating zone with cooling fan||3 ZONES|
|8||Heating capacity||3X3.6(=10.8 kw)|
|9||Vertical adjustment of head||300mm|
|10||Right/Left adjustment of head||20mm|
|11||Groove feed barrel cylinder||NO|
|12||Gear box||Hard gear decelerator|
|13||Safety precaution||Safety door and Safety switch|
|1||Continuous extrusion||Central incoming|
|2||Design||First in, first out|
|3||Heating zone||2 ZONES|
|5||Max die&pin diameter||75mm|
|6||Die head axis with pre-blow||12mm|
|1||Tie bar||C model double tie bar|
|3||Size of mold||340×370mm|
|7||Clamping stroke measurement||Proximal sensor TAIWAN|
|9||Support parts for platen movement||Moving and clamping axis|